HORIZONTAL BLINDS

Inside Mount
Measure the exact dimensions from one inside surface to the opposite inside surface (top, middle & bottom) - width first then length. Deduct 3/8" from the shortest width to allow for clearance in inside mounts. The factory will make the blind exactly the size ordered within tolerances of ± 1/8".

Outside Mount
Measure the exact width and length to be covered - width first then length. The factory will make the blind exactly the size ordered within tolerances of ± 1/8".

Ceiling Mount
If the blind is to be wall to wall, measure the exact dimensions from one inside surface to the opposite inside surface - width first and then length. Deduct 3/8" from width to allow for clearance in inside mounts. If a ceiling mount blind will only overlap the window (not wall to wall), we recommend overlapping the opening at least 3" on each side. The factory will make the blind exactly the size ordered within tolerances of ± 1/8".

Skylight and Specialty Blinds
Elite can manufacture a large number of different specialty Venetian Blinds. These range from simple skylight blinds to a variety of complex shapes. When measuring for these blinds, take all measurements carefully as the blind will be made to finished measurements. Include angles of inclination.

Multicolour Striping
Elite Venetian Blinds can be striped in any colour combination you require. Provide the multicolour information and slat count on the order along with the heights that the stripes are to be placed on the blind.

Detailed Measuring Instructions
The above measuring instructions are intended to be general. For additional measuring information please contact your Sales Representative or Customer Service for a copy of Elite's detailed measuring instructions.